Seite 1 von 1
Work Felgen für RS2
Verfasst: Freitag 19. Februar 2016, 16:54
von Schido
Hallo zusammen
Ich könnte eventuell Work-Felgen in der Dimension 8,5 x 18", ET41, LK 5x130mm für den RS2 kaufen. Ist diese Abmessung ok oder nicht optimal.
Danke für eure Meinung.
Gruss
Christoph
Verfasst: Freitag 19. Februar 2016, 20:55
von Volker
Unbedingt darauf achten das die Zentrierung für den RS2 ist sonst passen diesen nicht wenn die Felgen die Porsche Zentrierung haben
Verfasst: Samstag 20. Februar 2016, 06:42
von Jumi78
Ein RS2 braucht oiginal Felgen...nichts passt so gut da drauf wie die Porsche Cup!
Verfasst: Samstag 20. Februar 2016, 09:03
von Volker
Verfasst: Samstag 20. Februar 2016, 16:27
von Schido
Ok
Ihr habt mich überzeugt. Die Workfelgen sind gestorben.
Werde die original 17" Felgen auffrischen lassen.
Verfasst: Sonntag 21. Februar 2016, 15:17
von Jumi78
Sehr gute Wahl Christoph!!!
Re: Work Felgen für RS2
Verfasst: Mittwoch 27. November 2019, 18:19
von Audiit6
Hallo zusammen.
Welchen Farbton haben den die felgensterne auf dem silbernen Rs2 Volker.
MfG Matthias
Re: Work Felgen für RS2
Verfasst: Freitag 29. November 2019, 05:53
von Volker
Die wurden in Porsche sealgrau metallic lackiert
Re: Work Felgen für RS2
Verfasst: Dienstag 3. Dezember 2019, 20:12
von Audiit6
Sehr schön. Danke